Arcade 1UP

This is Szabos’s Arcades Exclusive custom bezel.

This was created to represent the original full size arcade cabinets artwork, scale wise and colors.

This will completely replace the stock bezel from Arcade 1up.

Some disassembly of your cabinet required to install.

 No cabinet or monitor is included.

All photos shown have the Reverse mounted option.

This is die cut 3m decals for both sides and front.

MIDWAY sides have red outline 

Midway front just white to match original full size cabinets.

this is for the new Arcade 1up Terminator 2 cabinet.

INCLUDES New Acrylic replacement print with self adhesive

 This is a designed marquee for your arcade 1up 

•  This is a simple swap out process no adhesive or removing of old print.
• You will need to loosen an remove one side of cabinet to access marquee on this title. 

This is not just a vinyl decal this is new reverse printed Acrylic.

 With zero color washout,  colors stay true and vibrant lighted or not lighted.

 https://www.szabosarcades.com/products/new-arcade-1up-slip-on-replacement-acrylic-marquees 

All of these have been rescaled to fit Arcade 1Up  from years of reproducing arcade art. All of these are from original full size cabinet files that I have spent endless hours on redoing each an every single marquee for accurate arcade reproductions

This is a custom designed Terminator Topper. 

 Dimensions for this are 10 1/2" H x 17 1/2" W

Acrylic with backlight for the ultimate finishing touch!

With super easy installation. No tools required.

*Cabinet not included 

This entire art package was scanned from original cabinet. These are extremely rare in the arcade world. Here at Szabo’s I am the only one in the industry that has redone the entire art package. I now have converted it over for the Arcade1up community.

this is just for the vinyl prints no cabinet or riser included. If you have a lighted marquee that is the translite option you want.

kit will include following

Marquee

bezel decal

CPO decal

both sides and front

3 sides for riser  

This entire art package was scanned from original cabinet. These are extremely rare in the arcade world. Here at Szabo’s I am the only one in the industry that has redone the entire art package. I now have converted it over for the Arcade1up community.

this is just for the vinyl prints no cabinet or riser included. If you have a lighted marquee that is the translite option you want.

kit will include following

3 sides for riser  

This is a new J panel for your Tron 1Up cabinet. This will give you rich colors once it is lighted. 

6 3/8 X18 

This piece of art I scanned from an original New Old Stock cardboard topper. When the Turtles in time game was released in 1991. They had these in cardboard to attach to top of the cabinet to draw attention to the newly released game! I took this a step further now reverse printing on Acyrlic for a more durable premium option. This is designed fit a Arcade 1up size cabinet and attaches in under a minute. 

This is for art only does not include riser.

Xmen themed art goes with my full Xmen Arcade 1up kit (sold separately)

printed on bubble free vinyl with easy application with satin over laminate.

cut to size only need to trim for the front where it dips down.

Custom designed by Szabo's Arcades. My custom design I originally did for the Midway full size cabinets. I now am converting to a smaller scale for the Arcade 1 up cabinets. 

There are a few options:

Vinyl print: Vinyl marquee, CPO  and bezel  

Acrylic version: both control panel and bezel reverse mounted on new acrylic and reverse mounted marquee. The Acrylic version CPO and vinyl option are not a standard size, or regulate button layout. I made them slightly bigger you will need to make a new wood panel or purchase ours (sold separately)

Both styles you can select from Scorpion or no Scorpion on the upper front art.   

*Cabinet not included 

Custom designed by Szabo's Arcades. My custom design I originally did for the Midway full size cabinets. I now am converting to a smaller scale for the Arcade 1 up cabinets. 

Bezel only

*Cabinet not included 

Custom designed by Szabo's Arcades. 

I have a real passion for the show and just really felt the need to make an art package for the 1up arcade machines. I spend many days designing to make this entire art package flow together as a whole.

There are two options, one is your standard decals for control panel.  Other is premium version with both new MDF control panel and acrylic reverse mounted control panel overlay..

Both kits include the topper/marquee combo.

*Cabinet not included this is for the artwork only*

Custom designed by Szabo's Arcades. This was my files that I completely vectorized originally for the full size Konami cabinets. I now have taken all the accurate art and colors and made it fit for the arcade 1up cabinets.

All vinyl die cut and printed on bubble free vinyl and laminated with satin laminate.

I have two options one with just decal marquee.

Other option with translite if you have a lighted marquee already.

 CPO depicts buttons that are cut out as an example, the item with ship without hole cut out. 

 This is one of many titles to come for the Arcade 1up cabinets, so stay tuned!!  

*Cabinet not included 

Custom designed by Szabo's Arcades. My custom design Now blends all three titles into one cabinet. All of the art has been totally redone for the full size cabinets, I am now bringing over that high quality standard over to the arcade 1up cabinets.

There are two print options, vinyl only or reverse mounted. 

NOTE: Select from a combination of MK titles for your side art ( I, II or III)  CPO ( mk I only) bezel ( mk I only ) and marquee ( I or II ) in the notes section upon check out.  
*this does not include the cabinet.  

Custom designed by Szabo's Arcades. My custom design Now blends all three titles into one cabinet. All of the art has been totally redone for the full size cabinets, I am now bringing over that high quality standard over to the arcade 1up cabinets.

There are two print options, vinyl only or reverse mounted. 

NOTE: Select from a combination of MK titles for your side art, CPO, bezel and marquee in the notes section upon check out.  

THIS DOES NOT INCLUDE THE CABINET ONLY ARTWORK FOE YOU TO APPLY TO YOUR OWN CABINET.

.

Now transferring my most accurate turtles and turtles in time art for the full size original cabinets on the market, to fit the 1up cabinet. This design I did incorporates the riser art with the cabinet to make the design unified.

Kit includes following.

Riser art- both sides and front

front upper and lower kick plate

both sides of cabinet

marquee.

topper sold separately on my site.

This does not include cabinet  just the artwork.

Print quality colors and fit are good. Has some distorted top edge on plastic. Can save some money if your not overly particular.

Small Capcom decal you can put anywhere you like matching original logo.

available in three different sizes to choose from. Sold as an individual item.

6" long

8" long

10" long

13" long

Custom designed by Szabo's Arcades. My custom design Now blends all three titles into one cabinet. All of the art has been totally redone for the full size cabinets, I am now bringing over that high quality standard over to the arcade 1up cabinets. This includes the upper and lower front panels.

.

Custom designed by Szabo's Arcades. My custom design Now blends all three titles into one cabinet. All of the art has been totally redone for the full size cabinets, I am now bringing over that high quality standard over to the arcade 1up cabinets. This includes the upper and lower front panels.

.

This is designed for the arcade 1up cabinets, comes with new acyrlic and revere printed. The wood panel is not included..

 Tron decals are made to go in center of GRS spinner and joystick.

Killer Instinct artwork scaled properly for the new 30th anniversary cabinet. This is one piece to include the small added extension on the new cabinets.  

This also includes box art for both sides and front to match original cabinets.

also 3 piece riser art. Have two options of art for that.

Control panel overlay.

Marquee sold separately.

Also coming soon moves bezel and we already have the topper available now.

This is for your new 30th Anniversary cabinet. Accurate color an representation of the original marquees. This is not a decal this is new acrylic.

Szabo’s exclusive dimensional backlighted pinball topper. This will finish up your pinball and make it standout in your game room and be the center of attention in any room.

mounts in minutes with no hardware needed.

led light included.

Mortal Kombat 1 moves list bezel for the 30th Anniversary cabinet. You do not need to remove old bezel this will place overtop existing one. This is acrylic an can been installed in a minute.

Also available for this cabinet is new side art, marquee and box art. (Sold separately)

Mortal Kombat 1 moves list bezel for the 30th Anniversary cabinet. You do not need to remove old bezel this will place overtop existing one. This is acrylic an can been installed in a minute.

Also available for this cabinet is new side art, marquee and box art. (Sold separately)

This is an accurate representation of the MK1 side art with all the halftones an colors to match original cabinet. Scaled properly for the new 30th anniversary cabinet. This is one piece to include the small added extension on the new cabinets.  

This also includes box art for both sides and front to match original cabinets.

Also shown in photo is a new accurate marquee replacement (sold separately) and my MK1 moves list bezel (sold separately). 

This is for your new 30th Anniversary cabinet. Accurate color an representation of the original marquee with halftones. This is not a decal this is new acrylic. 

also available is new side art, box art and moves bezel (sold separately)

This is for the Arcade1up Mortal Kombat 1 marquee only. (topper not included) You can now make your cabinet look like the classic Mortal Kombat 1 cabinet.

I have 3 options to choose from

1) vinyl print, this is for the first generation non lighted marquees.

2) translite this is non adhesive film designed for back lighted marquees (aftermarket not from 1up)

3) reverse printed back lighted print with 3m Adhesive.(This is to replace arcade 1up’s new lighted marquee print only. (You will have to peel off the original print that came from factory.) this is still only the print no marquee lighting included print only.

This bezel is my own custom design for the mk2 Arcade 1up cabinet. There are two option available.

1) just decal you apply to your orginal bezel on top.

2) all new plexi and it’s now reverse mounted not on face side.

This is a print only to go over your existing panel.

no wood or cabinet included.