Products

This was scanned and then vectorized from orginal art.

Reverse mounted on clear acyrlic and printed to allow light to shine.

As promised now available for you Street Fighter fans. This is a Szabo’s exclusive product, custom designed to fit Arcade 1Up cabinets. No screws required mounts in under a min. All your favorite character moves just a glance away. In photos your looking at also a new marquee, the originals on most of the 1up where yellowed and not matching the rest of the cabinet. And now it does. Marquee sold Separately.

Some photos show the acrylic version vs the card stock version. 

With super easy installation. No tools required.

Want to add the MK 3 topper to this order?  Add https://www.szabosarcades.com/products/mortal-kombat-3-topper to your order and use discount code “bundle” at check out for $5 off.  

Yoga Flame edition is only a change in the bracket.

*Cabinet not included 

These moves are based on a compiled list researching from numerous sites, There are some debates on some moves and distances so please keep that in mind. From all my research it's the most accurate i have been able to come up with.

This is for the Arcade1up Street Fighter 2 marquee only. (topper not included) most if not all the Street Fighter marquees came through from factory with a off colored yellowed marquee that did not match the cabinet. This now is the correct color and will match the topper if you decide to purchase that (separately) as well. Last photo you can see original marquee color.

This is for the Arcade1up Street Fighter 2 marquee only. (topper not included) most if not all the Street Fighter marquees came through from factory with a off colored yellowed marquee that did not match the cabinet. This now is the correct color and will match the topper if you decide to purchase that (separately) as well. Last photo you can see original marquee color.

Please select the options for this art.  Cardstock and Reverse Mounted on Acrylic available for each cabinet.  Cabinet sizes vary with HS-1, HS-5, Z-back, Big Blue, and now offering HS-9.

Please indicate in notes when ordering your dimensions.  If unsure of what cabinet size you have, please contact us prior to ordering to confirm sizing and dimensions.

This item has minor Bending damage from shipping.  Good Print quality and size for your cabinet.  Bezel is cardstock for is a SF HS-1.

HS-5 Front Mount Bezel.  PRINT ONLY.  Good print quality and size.  Will need to be trimmed for application.

Reverse PRINT ONLY bezel for Big Blue.  For acrylic bezels.  

Blemishville Product.  All sales are final.  No returns or exchanges.

This is scanned from orginal NOS Big Blue cabinet.

Reverse mounted on 3/16"  acrylic

Printed on bubble free vinyl with polycarbonate laminate. 

Now offering a premium laminate, reverse printed with a lexan velvet finish.

Please indicate your dimensions when ordering in the notes.  HS-1 and HS-5 please indicate the space between the CENTERS of the button holes.  For blank CPOs, please include the overall length and width of CPO.

 HS-5 and Z back are the same size.

HS-9 and Big Blue only come as blank CPOs with separate button labels.

HS-9 cabinets.  For these cabinets, until we have a template to make these with the button labels already on the CPO background, we are offering a blank background CPO and separate button labels to be applied yourself.  This can also be used for anyone who is making a Street Fighter 2 cabinet with a DIY cabinet or any cabinet that does not have regular dimensions. 

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Available in either Translite or Reverse mounted acrylic.  For HS-1, HS-5, or Zback dynamo cabinets.

Now offering for HS-9 dynamo cabinets.  If unsure what cabinet, please contact us with sizes to confirm before purchase.

Medallion Side Art to match original sides

Printed on bubble free laminate for easy application with Satin laminate

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Available in either Translite or Reverse mounted acrylic.  For HS-1, HS-5, or Zback dynamo cabinets.

Now offering for HS-9 dynamo cabinets.  If unsure what cabinet, please contact us with sizes to confirm before purchase.

This is heavy card stock to fit into an Dynamo Hs-1

23 3/4” x 23 3/4”

Street Fighter the movie Controls overlay. This is a rare item and I scanned from NOS set. This has 3m adhesive this is not a laminate, direct print to overlay.

die-cut ready to install.

comes in a pair.

This is for your new 30th Anniversary cabinet. Accurate color an representation of the original. This is not a decal this is new acrylic..

Bezels have two options 1. Print applied on cardboard 2. Mounted on  acrylic

Medallion side art

Printed on bubble free laminate for easy application with satin laminate 

 In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Control panel overlay is on bubble free vinyl on the polycarbonate laminate.

Now offering a premium laminate, reverse printed with a lexan velvet finish.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

This is the complete remastered art set. Includes

Side art (both sides)

CPO with polycarbonate laminate

Translite marquee included.

However, reverse mounted could be purchased separately at: 

 https://www.szabosarcades.com/products/sunset-riders-marquee-1

Chose "art set with no marquee" for the discounted price on this full art set and than purchase the separate marquee   

 In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Control panel overlay is on bubble free vinyl on the polycarbonate laminate.

Now offering a premium laminate, reverse printed with a lexan velvet finish.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

two options for this.

Translite Non-adhesive backing to app behind your own plexi.

Reverse mounted on new Acrylic panel

Printed on bubble free laminate for easy application with Satin laminate 

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Mounted on 3/16" tinted acrylic cut for original Nintendo size cabinets

Printed on smoked 3/16 plexi, the custom design was created by Jonathan Scott. First standard Nintendo cabinet.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

Printed on 1/8” plexi sized for original Nintendo cabinets, the custom design was created by Jonathan Scott.

Medallion size die-cut side art, printed on 3m vinyl with a satin laminate, this was sizes for Nintendo cabinets. Design was created by Jonathan Scott.

Printed on bubble free laminate for easy application with satin laminate.

In order to ensure you achieve the best results from these products. When painting your cabinet DO NOT use latex based paint. No mater how long you wait for it to dry the vinyl will not properly adhere, it will eventually lift and/or not stick. I recommend oil based paints or other automotive finishes. 

There are two options for marquees. 

1. Translite material, back lit with no adhesive.
2. Rear printed acrylic.

Choose for the following cabinet sizes.

Reverse printed Big Blue Marquee for Super Street Fighter.  PRINT ONLY marquee.  

Blemishville Product.  All sales are final.  No returns or exchanges.